须知当使用电动工具时,基本的预防措施,包括以下几条,应该一直遵循说明以减少火灾,触电和人员伤害事故的风险.在使用本产品之前,请通读须知,并将其妥善保存.为了操作：

　　When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, and personal injury accidents. Before using this product, please read the safety instructions carefully and store them properly. For safe operation:

　　1) 保持工作地点整洁保持工作环境清洁，并且有充足的光亮，混乱的工作区域和工作台容易导致人员受伤。

　　1) Keep the workplace clean and tidy, with sufficient lighting. Chaotic work areas and workbenches can easily lead to personal injury.

　　2) 重视工作场所的环境不要将电动工具暴露于雨水中，不要在潮湿和多雨的场所使用电动工具，不要在有引起火灾或爆炸等风险的地方使用电动工具。

　　2) Pay attention to the workplace environment and do not expose power tools to rainwater. Do not use power tools in damp and rainy places, and do not use power tools in areas with risks of fire or explosion.

　　3) 避免触电工作时避免身体直接接触土地以及接地的导电物体。4) 远离儿童不要让参观者触摸工具和延伸绝缘电线，一律禁止闲人进入工作场所。

　　3) Avoid direct contact with the ground and grounded conductive objects during work to prevent electric shock. 4) Keep away from children and do not allow visitors to touch tools and extended insulated wires. Unauthorized individuals are strictly prohibited from entering the workplace.

　　5) 闲置工具贮藏当电动工具不用时，工具应该储存在干燥的高处、儿童找不到的地方。

　　5) When electric tools are not in use, they should be stored in a dry, high place where children cannot find them.

　　6) 不要勉强使用工具在工具的适用范围内使用工具，才能获得良好的效果和。

　　6) Do not force yourself to use tools within their scope of application in order to achieve good results and safety.

　　7) 使用正确的工具不要强迫小型的工具和附属品去完成一个重型工具的工作，不要用工具完成预期外的目的。

　　7) Do not force small tools and accessories to complete the work of a heavy tool, and do not use tools to achieve unexpected goals.

　　8) 适当着装不可穿宽松的衣服或戴首饰进行工作，因为可能被高速旋转的部件缠住而发生意外，当在室外工作时，建议配备橡胶手套和防滑胶鞋，戴保护头盔包住长发。

　　8) Wear appropriate clothing and avoid loose fitting clothes or jewelry when working, as accidents may occur due to entanglement with high-speed rotating parts. When working outdoors, it is recommended to wear rubber gloves and non slip rubber shoes, and a protective helmet to cover long hair.

　　9) 使用眼镜和听力保护装置

　　9) Use safety goggles and hearing protection devices

　　10) 不要乱用绝缘电线不要通过绝缘电线移动电动工具或者猛拉使其脱离机器主体，使绝缘电线远离热源、油污和锋利的边缘。

　　10) Do not misuse insulated wires. Do not use insulated wires to move power tools or forcefully pull them away from the machine body. Keep insulated wires away from heat sources, oil stains, and sharp edges.

　　11) 保护工作使用夹钳固定住制造品，比用手更，可以空出双手操作工具。

　　11) Using clamps to secure manufactured products for protection work is safer than using hands and allows for hands-free operation of tools.

　　12) 不要伸越工具工作时，保持适当的姿势，必须站稳。

　　12) When working with tools, maintain an appropriate posture and stand firmly.

　　13) 仔细保养工具保持工具清洁，确保工具更好、更的性能，按照说明书定期进行保养，定期检查工具， 电线，如果损坏应及时更换。

　　13) Carefully maintain tools to keep them clean and ensure better and safer performance. Follow the instructions for regular maintenance, inspect tools and wires regularly, and replace them promptly if damaged.

　　14) 电源脱离当工具不使用、技术维护、修理、保养和更换配件，请断开电源。

　　14) When the power supply is disconnected and the tool is not in use, for technical maintenance, repair, maintenance, or replacement of parts, please disconnect the power supply.

　　15) 取下调整用工具及扳手在开动机器前，需检查调节扳手是否已脱离工具。

　　15) Before starting the machine, it is necessary to check whether the adjusting wrench has been detached from the tool.

　　16) 使用户外延长线在户外使用工具，需使用户外专用延长线路。

　　16) When using outdoor extension cords for tools, it is necessary to use outdoor dedicated extension cords.

　　17) 保持清醒专心一致注意正在进行的工作，当你在疲倦或在酒精、药物作用下的时候不要操作工具。

　　17) Stay awake, focused, and attentive to the work in progress. Do not operate tools when you are tired or under the influence of alcohol or drugs.

　　18) 检查损坏部件再次使用工具之前，仔细检查工具是否损坏，若有应判断其是否将影响到工具的正确操作，检查所有可移动的部分是否在正确的位置，固定的部分是否紧固等，检查可能影响正常操作的部件，有损坏部件应反厂或请授权服务中心修理或替换，不可在开关失灵的情况下使用工具。

　　18) Before using the tool again, carefully check whether the damaged parts are damaged. If so, determine whether it will affect the correct operation of the tool. Check whether all movable parts are in the correct position, whether the fixed parts are fastened, etc. Check for parts that may affect normal operation. If there are damaged parts, they should be returned to the factory or authorized service centers for repair or replacement. Do not use the tool when the switch is malfunctioning.

　　19) 警告！使用本操作说明书以外的附件或部件容易造成伤害事故。

　　19) Warning! Using accessories or components outside of this operating manual can easily cause injury accidents.

　　20) 请有资格的人员修理工具本电动工具符合相关要求，务必请人员使用原装部件进行维修，并使用原厂的配件，否则可能会给用户带来严重伤害。

　　20) Qualified personnel are required to repair this electric tool to ensure compliance with relevant safety requirements. Professional personnel must use original parts and factory accessories for repairs, otherwise it may cause serious harm to the user.

　　本文由 扭剪螺栓专用扳手  友情奉献.更多有关的知识请点击 https://www.xjnwz.com/    真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the special wrench for twisted shear bolts. For more related knowledge, please click https://www.xjnwz.com/ Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned