一.电动扭剪扳手操作规程警告!在使用电动扭剪扳手时，为避免火灾、电击、受伤及机械损伤等意外事故，严格遵守以下规则。
I Operating instructions for electric torsional shear wrench warning! In order to avoid accidents such as fire, electric shock, injury and mechanical damage, the following rules shall be strictly observed when using electric torsion shear wrench.
1.电源电不超过电动扭剪扳手铭牌上额定电压的10%。
1. The power supply shall not exceed 10% of the rated voltage on the nameplate of the electric torsional shear wrench.
2.扭剪扳手使用的电源插座与电动扳手上的电源插头相匹配，输入侧电源(拖线盘)装有漏电保护器。
2. The power socket used for the torsion shear wrench matches the power plug on the electric wrench, and the power supply (cable tray) on the input side is equipped with leakage protector.
3.扭剪扳手机体、电线、漏电保护器完好。
3. The mobile phone body, wire and leakage protector are intact.
4.在高处作业时，电动扭剪扳手系好保护绳。
4. When working at heights, fasten the protective rope with an electric torsional shear wrench.
5.不得在潮湿或被雨淋到的地方使用，不得在存放易燃、易爆气体的地方使用。
5. It shall not be used in places that are wet or drenched by rain, or in places where flammable and explosive gases are stored.
6.正确选用合适的套筒。
6. Select appropriate sleeve correctly.
7.操作时，应按规范穿戴工作服、身体要保持平衡。
7. During operation, work clothes shall be worn according to the specifications, and the body shall be kept balanced.
8.不得拉扯扭剪扳手上的导线，不得用拉导线的方法来拔插头。
8. Do not pull the wire on the torsion shear wrench or pull the plug by pulling the wire.
9.使用完毕，拔掉电源插头。
9. After use, unplug the power plug.
二.正确操作方法
II Correct operation method
1.对电动扭剪扳手进行调整或更换附件、备件之前，切断电源。
1. Cut off the power supply before adjusting the electric torsion shear wrench or replacing accessories and spare parts.
2.拆卸或按装内外套筒的方法。拆卸或按装内外套筒时，切不可让异物进到工具内。先拧松固定外套筒上的两个螺丝
2. Disassemble or install the inner and outer sleeves. When removing or installing the inner and outer sleeves, do not allow foreign matters to enter the tool. First loosen the two screws fixing the outer sleeve
The above is the detailed introduction of torsion shear wrench for you. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service https://www.xjnwz.com
