济南万中扭剪型电动扳手 便携式扭剪扳手 钢结构专用电动扳手
Jinan Wanzhong torsion shear electric wrench portable torsion shear wrench special electric wrench for steel structure
扭剪型电动扳手用于紧固扭剪型螺栓副。该扳手具备效率高、性能可靠、轻便、美观、耐用等特点。
The torsion shear electric wrench is used to fasten the torsion shear bolt pair. The wrench has the characteristics of high efficiency, reliable performance, portability, beauty and durability.
本机只需要更换内外套筒即可适用于各厂家生产的M16-M30高强度扭剪型螺栓的施工作业。本机采用特殊钢材及CM01特殊的热处理工艺，经久耐用，作业时无反弹力
The machine can be used for the construction of m16-m30 high-strength torsional shear bolts produced by various manufacturers only by replacing the inner and outer sleeves. This machine adopts special steel and CM01 special heat treatment process, which is durable and has no rebound force during operation
扭剪型电动扳手使用方法：
Usage of torsion shear electric wrench:
1、 用扳手内套筒完全插进螺栓尾部梅花头部分，同时向前推动扳手，内套筒后退，使外套筒完全套住螺母，若不能完全套住螺母请左右转动扳手并向前用力。
1. Insert the inner sleeve of the wrench into the box head at the end of the bolt completely, and push the wrench forward at the same time. The inner sleeve retreats so that the outer sleeve completely covers the nut. If the nut cannot be completely covered, please turn the wrench left and right and exert forward force.
2、 扣动扳手开关，使其旋转。
2. Turn the wrench switch to make it rotate.
拧断梅花头，紧固结束，同时扣动扳j弹出梅花头。
Unscrew the plum blossom head, tighten it, and pull the wrench J to eject the plum blossom head.
The wonderful content of this article is provided by the knowledge provided by the torsion shear electric wrench. There are many wonderful content on this website. You can click to enter more content: https://www.xjnwz.com We have special customer service to answer your questions
