Torsional shear wrench is mainly used for torsional shear type high-strength bolts. Its purpose is to break the working target wrench head bolt head and turn the switch to work. After a few seconds, the bolt head will be broken, and then take out a wrench to pop the ring head and pull the trigger, or complete the work.

电动扳手的影响主要是螺栓开始时,很容易使用和旨在螺栓拉主电源开关线电气zui终扭转剪切扳手扭剪型高强度螺栓,螺栓把电源开关的使用,直到扭剪型高强度螺栓梅花头中断。电动恒转矩扳手可能zui终紧紧初,它的使用是先调整转矩,然后螺栓扳手主要电气角落也属于一种恒转矩扳手,它的使用是先调整旋转程度,然后拧紧螺丝。电动角向扳手是一种特殊的电扳手，专门固定在钢架角的螺栓。它和扭剪电动扳手一样。

The main impact of electric wrench is that it is easy to use and designed to pull the main power switch wire with bolts at the beginning of the bolt. The electric zui final torsion shear wrench torsion shear type high-strength bolt, the use of the bolt to turn the power switch, until the torsion shear type high-strength bolt Torx is interrupted. The electric constant torque wrench may be used to adjust the torque first, and then the main electrical corner of the bolt wrench is also a constant torque wrench. Its use is to adjust the rotation degree first, and then tighten the screw. The electric angle wrench is a special type of electric wrench, which is specially used to fix the bolt at the steel frame angle. It is the same as the electric wrench for torsion shear.

扭剪型电动扳手的特点：

Features of torsion shear type electric wrench:

（1）使用寿命长

(1) Long service life

（2）手柄和机壳材料散热性好

(2) Handle and shell materials have good heat dissipation

（3）功率大

(3) High power

（4）耐撞击性强

(4) Strong impact resistance

（5）手使用

(5) Hand use

本文由扭剪电动扳手整理发布，您是不是对这些内容有所了解了呢?更多的内容请点击：https://www.xjnwz.com我们会有更多精彩内容等你查看。

This article is organized and released by the torsion shear electric wrench. Do you know something about these contents? For more information, please click: https://www.xjnwz.com We will have more wonderful content waiting for you to check.