在使用电动扭剪扳手时，为避免火灾、电击、受伤及机械损伤等意外事故，必须严格遵守以下规程。
When using an electric torsion wrench, in order to avoid accidents such as fire, electric shock, injury, and mechanical damage, the following safety regulations must be strictly followed.
1电源电压不超过电动扭剪扳手铭牌上额定电压的 10%。
The power supply voltage shall not exceed 10% of the rated voltage on the nameplate of the electric torque wrench.
2扭剪扳手使用的电源插座必须与电动扳手上的电源插头相匹配，输入侧电源(拖线盘)必须装有漏电保护器。
The power socket used for the 2 torsion wrench must match the power plug on the electric wrench, and the input power supply (cable tray) must be equipped with a leakage protector.
3扭剪扳手机体、电线、漏电保护器必须完好。
3. The body, wires, and leakage protector of the torsion wrench must be intact.
4在高处作业时，电动扭剪扳手必须系好绳。
When working at heights, the electric torsion wrench must be tied with a safety rope.
5不得在潮湿或被雨淋到的地方使用，不得在存放易燃、易爆气体的地方使用。
5. Do not use in damp or rainy areas, and do not use in places where flammable and explosive gases are stored.
6 正确选用合适的套筒。
6. Choose a suitable sleeve correctly.
7操作时，应按规范穿戴工作服、帽、带，身体要保持平衡。
During operation, work clothes, safety helmets, and seat belts should be worn according to regulations, and the body should maintain balance.
8不得拉扯扭剪扳手上的导线,不得用拉导线的方法来拔插头。
Do not pull the wire on the torsion wrench, and do not use the method of pulling the wire to pull out the plug.
9 使用完毕，拔掉电源插头。
9. After use, unplug the power plug.
