服务热线: 400-117-8816
           13406879330

扭剪扳手,扭剪螺栓专用扳手,扭剪电动扳手,扭剪枪生产厂家

当前位置:首页>新闻中心电动扳手几种类型的区别

电动扳手几种类型的区别

来源:https://www.xjnwz.com日期:2024-06-28 发布人:创始人

1、冲击电动扳手:主要是初紧螺栓的,它的操作简单,就是对准螺栓扳动电源开关就行。

1. Impact electric wrench: mainly used for initial tightening of bolts, its operation is simple, just align the bolt and pull the power switch.

2、电动扭剪扳手:主要是终紧扭剪型高强螺栓的,它的使用就是对准螺栓扳动电源开关,直到把扭剪型高强螺栓的梅花头打断为止。

2. Electric torsion shear wrench: mainly used for final tightening of torsion shear high-strength bolts. Its use is to align the bolt and pull the power switch until the plum blossom head of the torsion shear high-strength bolt is broken.

3、电动定扭矩扳手:既可初紧又可终紧,它的使用是先调节扭矩,再紧固螺栓。

c80b7e54-b854-4824-ad6c-502a7d75fc57

3. Electric fixed torque wrench: It can be used for both initial and final tightening. Its use is to first adjust the torque and then tighten the bolts.

4、电动转角扳手:主要也属于定扭矩扳手的一种,它的使用是先调节旋转度数,再紧固螺栓。

4. Electric angle wrench: It mainly belongs to a type of fixed torque wrench, and its use is to adjust the degree of rotation first, and then tighten the bolt.

5、电动角向扳手:是一种专门紧固钢架夹角部位螺栓的电动扳手,它的使用和电动扭剪扳手原理一样。

5. Electric angle wrench: It is a type of electric wrench specifically designed to tighten bolts at the angle of a steel frame, and its use is similar to the principle of an electric torsion wrench.