The torsion shear wrench is mainly used for torsion shear type high-strength bolts. Its purpose is to break the target wrench head bolt head of the torsion shear type high-strength bolt, and the switch can start working. After a few seconds, the bolt head will be broken, and then a wrench will be taken out to pop the head and pull the trigger, or complete the work.

电动扳手的影响主要是螺栓开始时,很容易使用和旨在螺栓拉主电源开关线电气zui终扭转剪切扳手扭剪型高强度螺栓,螺栓把电源开关的使用,直到扭剪型高强度螺栓梅花头中断。电动恒转矩扳手可能zui终紧紧初,它的使用是先调整转矩,然后螺栓扳手主要电气角落也属于一种恒转矩扳手,它的使用是先调整旋转程度,然后拧紧螺丝。电动角向扳手是一种特殊的电扳手，专门固定在钢架角的螺栓。它和扭剪电动扳手一样。

The main impact of an electric wrench is that it is easy to use at the beginning of the bolt and is designed to pull the main power switch wire with the bolt. The final torsion shear wrench is used to twist the shear type high-strength bolt, and the bolt is used to turn the power switch until the shear type high-strength bolt's plum blossom head is interrupted. An electric constant torque wrench may be used to tighten the bolt first, and then adjust the torque. The main electrical corner of the bolt wrench also belongs to a constant torque wrench, which is used to adjust the degree of rotation first, and then tighten the screw. Electric angle wrench is a special type of electric wrench specifically designed for fixing bolts to the corners of a steel frame. It is the same as a torsion shear electric wrench.

扭剪型电动扳手的特点：

Characteristics of torsion shear electric wrenches:

（1）使用寿命长

(1) Long service life

（2）手柄和机壳材料散热性好

(2) Good heat dissipation of handle and casing materials

（3）功率大

(3) High power

（4）耐撞击性强

(4) Strong impact resistance

（5）手使用

(5) Hand use

本文由扭剪扳手整理发布，您是不是对这些内容有所了解了呢?更多的内容请点击：https://www.xjnwz.com我们会有更多精彩内容等你查看。

This article is organized and published by the price of torsion wrench. Have you gained some understanding of these contents? For more information, please click on: https://www.xjnwz.com We will have more exciting content waiting for you to check out.